Programming the MRC via the App:
- Go to the cogwheel at the bottom left.
- Choose “Programme”.
- Choose the number of periods (the number of chosen periods is the same for all days!)
- Select the days (e.g. Mon, Di, Wed, Do, Fri) you wish to change (small dots turn yellow).
- Set the desired times and temperature, you do not have to confirm anything.
- NB: The bullets always turn grey again after programming.
- Repeat this for the days that have not yet been set (in this example, Sa and Sun).
- Set the desired times and temperature, you do not have to confirm anything.
To view the set times and temperature in the App:
- Select 1 day and you can see the set times for that day. A weekly overview can only be viewed on the controller via MENU > Programming. Here you can see all the set times in the overview.
Programming the MRC via the thermostat:
- Select MENU > Programming > OK > “Overwrite previous schedule?” > OK
- Select number of periods (the number of selected periods is the same for all days!)
- Select the days (e.g. Mo, Di, Wo, Do, Fr) you want to change (bullets turn yellow).
- Set the desired times and temperature and confirm each time with “SET”.
- The days that have already been set are now shown as black balls with a yellow border.
- Select the remaining days (e.g. Sunday and Sunday) that you wish to adjust (the balls turn yellow).
- Set the desired times and temperature and confirm each time with “SET”.
To view the set times and temperature via the thermostat:
- Select MENU > Programming. You will now see all the set times in the overview. Leave the menu via the return key.