MAGNUM Tracing Connections

Various connection possibilities for MAGNUM Tracing. 


Verbindingsunit voor MTR, MTGH en MTHW

Connection piece (straight) for connecting or transferring tracing cables. Supplied with 1 x shrinkage insulation end seal kit.

Dimensions (mm)

26,5-32 mm x 115-130 mm

Class

IP68/5 Bar

T marking

T85ºC

Operating temp. -40ºC tot +125ºC
Tracing index PTI250

Connection unit for MTM & MTW

Connection piece (straight) for connecting or transferring tracing cables. Supplied with 1 x shrinkage insulation end seal kit.

Dimensions (mm)

26,5-32 mm x 115-130 mm

Class

IP68/5 Bar

T marking

T85ºC

Operating temp. -40ºC tot +125ºC
Tracing index PTI250

Dividing unit for MTR, MTGH and MTHW

Connection piece (T) for connecting or splitting tracing cables. Supplied including 2x Shrinkage insulation end seal kits

Dimensions (mm)

36 x 137 x 118 mm

Class

IP54-IP65

OPerating temp.

-40ºC tot +125ºC


Dividing unit for MTM & MTW

Connection piece (T) for connecting or splitting tracing cables. Supplied including 2x shrinkage insulation end seal kits.

Dimensions (mm)

36 x 137 x 118 mm

Class

IP54-IP65

Operating temp. -40ºC tot +125ºC

Cable gel connection piece

A universal connection piece that is also suitable for each cable type. Highly reliable and can be installed without advanced tools.

test

 

 

 

 

 

 

Connection                         Increasing cable length   

 

 

 

 

 

 

Y-connection                         End seal


Shrinkage insulation connection kit

For connecting an connection cable, connecting

cables to each other, or repairing damaged cables.

Kit contains all needed components, including shrink tubing and connectors. Use: 1 kit for each cable.


Shrinkage insulation end seal kit

For sealing a cable end.

Use: 1 Shrink tube per cable end.


Connection box IP 55

Connection box IP55 including DIN-rail connection clips. For connecting or splitting more than onetracing cable.

IP-Class

IP55

Dimensions 125 x 125 x 75 mm

Cable gland (20 mm) for MTM, MTW, MTR and MTGH

For feeding an MTM, MTW, MTR and MTGH tracing cable through into an connection box. One gland for each cable.

 

Cable gland (25 mm) for MTHW

For feeding an MTHW tracing cable through into an connection box. One gland for each cable.


¾” Brass cable conductor/pipe connection for MTW

Brass cable conductor for watertight sealing of the water pipe.

 

For applying a MAGNUM Trace Water in a water pipe with a minimum diameter of 22 mm.


Glass fibre tape

Special adhesive glass fibre tape

for installing a tracing cable on piping.

Breadth tape

25 mm

Length tape

33 meters

Installation

3 windings for each 30 cm


Alutape

Especially for winding around plastic piping when a tracing cable is needed. This tape gives a higher heat outlet for plastic piping.

Breadth tape

50 mm
Length tape 22,5 meters

Support bracket for gutter-Set of 3 pieces

These support brackets support the cable and keep it in position in the gutter or drain. In gutters where 2 cables are needed, these brackets make sure the cables stay at the correct distance.


Gutter clips-Set of 10 pieces

With these gutter clips you can fix the cables in the eaves in an easy manner. Needed: 1 clip per 0.5 meter tracing.


Warning sticker- per set of 5 pieces

To be applied as a warning in places where 

tracinghas been installed.

Connection unit
Connection unit

Floor Heating Wizard

Start here
Configure
  • WE COME FULL CIRCLE!

    WE COME FULL CIRCLE! WE COME FULL CIRCLE!

    MAGNUM Heating has come "full circle" and introduces its new waterbased floorheating systems. Download the introduction brochure here.