Tracing | Self- regulating heating tape< 85°C

MAGNUM Trace Regular - MTR is an industrial grade self-

regulating heating tape that can be used for freeze protection or temperature maintenance of pipework and vessels up to

85°C.

For use in non-hazardous, hazardous and corrosive areas. It can be cut-to-length on-site to match exact piping lengths without any complicated design considerations. Its self-regulating characteristics improve safety and reliability. This MTR will not overheat or burn, even when overlapping upon itself. It’s power output self-regulates in response to the pipe temperature. MTR is available with a corrosion resistant thermoplastic outer jacket.

Applications

Cold water pipes
Drains
Sprinkler systems
Oil pipelines

Additional information

The extent of the loss of heat depends on the diameter of the piping, the ambient temperature and the flow of liquid Extra insulation is advised. Use of a temperature regulator reduces energy consumption.

For calculating the heat loss and the applicable cable, you can

contact the sales department of MAGNUM Heating.

Maximum temperature	Without power 85°C / with power 65°C
Minimum operating temperature	-30°C
Maximum resistance	18,2 Ohm/km
Voltage	230 V (115 V at request)
Outer jacket	Tinned copper
Coating	Fluor polymer (optional)
Water resistant	100%
Dimensions	13 x 6,8 mm
Minimum bending radius	25 mm
Weight	12 kg/100 m
T-Rating 10, 15, 25 W/m	T6
T-Rating 33 W/m	T5
Color	Grey
Inspections	10 mtr & 15 mtr: CE /RU 15 mtr & 33 mtr: CE / RU / FM / EX according to DIN EN 62395-1

Maximum advised cable length at 230V with use of Type-C relay:

Category	Switch Temp.	230V
Reference	Switch Temp.	16A	20A	30A

10MT	+10°C	205 m	-	-
	-15°C	140 m	186 m	195 m
	-25°C	123 m	165 m	195 m
15MT	+10°C	145 m	162 m
	-15°C	93 m	125 m	160 m
	-25°C	82 m	111 m	160 m
25MT	+10°C	88 m	117 m	126 m
	-15°C	60 m	75 m	117 m
	-25°C	50 m	70 m	105 m
33MT	+10°C	70 m	90 m	108 m
	-15°C	50 m	65 m	95 m
	-25°C	45 m	58 m	85 m